#!@BASH_SHELL@ -e # # makepkg - make packages compatible for use with pacman # @configure_input@ # # Copyright (c) 2006-2011 Pacman Development Team # Copyright (c) 2002-2006 by Judd Vinet # Copyright (c) 2005 by Aurelien Foret # Copyright (c) 2006 by Miklos Vajna # Copyright (c) 2005 by Christian Hamar # Copyright (c) 2006 by Alex Smith # Copyright (c) 2006 by Andras Voroskoi # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see . # # makepkg uses quite a few external programs during its execution. You # need to have at least the following installed for makepkg to function: # awk, bsdtar (libarchive), bzip2, coreutils, fakeroot, file, find (findutils), # gettext, grep, gzip, openssl, sed, tput (ncurses), xz # gettext initialization export TEXTDOMAIN='pacman' export TEXTDOMAINDIR='@localedir@' # file -i does not work on Mac OSX unless legacy mode is set export COMMAND_MODE='legacy' myver='@PACKAGE_VERSION@' confdir='@sysconfdir@' BUILDSCRIPT='@BUILDSCRIPT@' startdir="$PWD" srcdir="$startdir/src" pkgdir="$startdir/pkg" packaging_options=('strip' 'docs' 'libtool' 'emptydirs' 'zipman' 'purge') other_options=('ccache' 'distcc' 'buildflags' 'makeflags') splitpkg_overrides=('pkgver' 'pkgrel' 'pkgdesc' 'arch' 'license' 'groups' \ 'depends' 'optdepends' 'provides' 'conflicts' 'replaces' \ 'backup' 'options' 'install' 'changelog') readonly -a packaging_options other_options splitpkg_overrides # Options ASROOT=0 CLEANUP=0 CLEANCACHE=0 DEP_BIN=0 FORCE=0 INFAKEROOT=0 GENINTEG=0 SKIPINTEG=0 INSTALL=0 NOBUILD=0 NODEPS=0 NOEXTRACT=0 RMDEPS=0 REPKG=0 LOGGING=0 SOURCEONLY=0 IGNOREARCH=0 HOLDVER=0 BUILDFUNC=0 CHECKFUNC=0 PKGFUNC=0 SPLITPKG=0 PKGLIST=() # Forces the pkgver of the current PKGBUILD. Used by the fakeroot call # when dealing with svn/cvs/etc PKGBUILDs. FORCE_VER="" PACMAN_OPTS= ### SUBROUTINES ### plain() { local mesg=$1; shift printf "${BOLD} ${mesg}${ALL_OFF}\n" "$@" >&2 } msg() { local mesg=$1; shift printf "${GREEN}==>${ALL_OFF}${BOLD} ${mesg}${ALL_OFF}\n" "$@" >&2 } msg2() { local mesg=$1; shift printf "${BLUE} ->${ALL_OFF}${BOLD} ${mesg}${ALL_OFF}\n" "$@" >&2 } warning() { local mesg=$1; shift printf "${YELLOW}==> $(gettext "WARNING:")${ALL_OFF}${BOLD} ${mesg}${ALL_OFF}\n" "$@" >&2 } error() { local mesg=$1; shift printf "${RED}==> $(gettext "ERROR:")${ALL_OFF}${BOLD} ${mesg}${ALL_OFF}\n" "$@" >&2 } ## # Special exit call for traps, Don't print any error messages when inside, # the fakeroot call, the error message will be printed by the main call. ## trap_exit() { if (( ! INFAKEROOT )); then echo error "$@" fi [[ -n $srclinks ]] && rm -rf "$srclinks" exit 1 } ## # Clean up function. Called automatically when the script exits. ## clean_up() { local EXIT_CODE=$? if (( INFAKEROOT )); then # Don't clean up when leaving fakeroot, we're not done yet. return fi if (( ! EXIT_CODE && CLEANUP )); then local pkg file # If it's a clean exit and -c/--clean has been passed... msg "$(gettext "Cleaning up...")" rm -rf "$pkgdir" "$srcdir" if [[ -n $pkgbase ]]; then # TODO: this wasn't properly fixed in commit 2020e629 local fullver=$(get_full_version $epoch $pkgver $pkgrel) # Can't do this unless the BUILDSCRIPT has been sourced. if (( BUILDFUNC )); then rm -f "${pkgbase}-${fullver}-${CARCH}-build.log"* fi if (( CHECKFUNC )); then rm -f "${pkgbase}-${fullver}-${CARCH}-check.log"* fi if (( PKGFUNC )); then rm -f "${pkgbase}-${fullver}-${CARCH}-package.log"* elif (( SPLITPKG )); then for pkg in ${pkgname[@]}; do rm -f "${pkgbase}-${fullver}-${CARCH}-package_${pkg}.log"* done fi # clean up dangling symlinks to packages for pkg in ${pkgname[@]}; do for file in ${pkg}-*-*-${CARCH}{${PKGEXT},${SRCEXT}}; do if [[ -h $file && ! -e $file ]]; then rm -f $file fi done done fi fi remove_deps } ## # Signal Traps ## set -E trap 'clean_up' 0 trap 'trap_exit "$(gettext "TERM signal caught. Exiting...")"' TERM HUP QUIT trap 'trap_exit "$(gettext "Aborted by user! Exiting...")"' INT trap 'trap_exit "$(gettext "An unknown error has occurred. Exiting...")"' ERR # a source entry can have two forms : # 1) "filename::http://path/to/file" # 2) "http://path/to/file" # Return the absolute filename of a source entry # # This function accepts a source entry or the already extracted filename of a # source entry as input get_filepath() { local file="$(get_filename "$1")" if [[ -f "$startdir/$file" ]]; then file="$startdir/$file" elif [[ -f "$SRCDEST/$file" ]]; then file="$SRCDEST/$file" else return 1 fi echo "$file" } # Print 'source not found' error message and exit makepkg missing_source_file() { error "$(gettext "Unable to find source file %s.")" "$(get_filename "$1")" plain "$(gettext "Aborting...")" exit 1 # $E_MISSING_FILE } # extract the filename from a source entry get_filename() { # if a filename is specified, use it local filename="${1%%::*}" # if it is just an URL, we only keep the last component echo "${filename##*/}" } # extract the URL from a source entry get_url() { # strip an eventual filename echo "${1#*::}" } ## # usage : get_full_version( $epoch, $pkgver, $pkgrel ) # return : full version spec, including epoch (if necessary), pkgver, pkgrel ## get_full_version() { if [[ $1 -eq 0 ]]; then # zero epoch case, don't include it in version echo $2-$3 else echo $1:$2-$3 fi } ## # Checks to see if options are present in makepkg.conf or PKGBUILD; # PKGBUILD options always take precedence. # # usage : check_option( $option ) # return : y - enabled # n - disabled # ? - not found ## check_option() { local ret=$(in_opt_array "$1" ${options[@]}) if [[ $ret != '?' ]]; then echo $ret return fi # fall back to makepkg.conf options ret=$(in_opt_array "$1" ${OPTIONS[@]}) if [[ $ret != '?' ]]; then echo $ret return fi echo '?' # Not Found } ## # Check if option is present in BUILDENV # # usage : check_buildenv( $option ) # return : y - enabled # n - disabled # ? - not found ## check_buildenv() { echo $(in_opt_array "$1" ${BUILDENV[@]}) } ## # usage : in_opt_array( $needle, $haystack ) # return : y - enabled # n - disabled # ? - not found ## in_opt_array() { local needle=$1; shift local opt for opt in "$@"; do if [[ $opt = $needle ]]; then echo 'y' # Enabled return elif [[ $opt = "!$needle" ]]; then echo 'n' # Disabled return fi done echo '?' # Not Found } ## # usage : in_array( $needle, $haystack ) # return : 0 - found # 1 - not found ## in_array() { local needle=$1; shift [[ -z $1 ]] && return 1 # Not Found local item for item in "$@"; do [[ $item = $needle ]] && return 0 # Found done return 1 # Not Found } get_downloadclient() { # $1 = URL with valid protocol prefix local url=$1 local proto="${url%%://*}" # loop through DOWNLOAD_AGENTS variable looking for protocol local i for i in "${DLAGENTS[@]}"; do local handler="${i%%::*}" if [[ $proto = $handler ]]; then local agent="${i##*::}" break fi done # if we didn't find an agent, return an error if [[ -z $agent ]]; then error "$(gettext "There is no agent set up to handle %s URLs. Check %s.")" "$proto" "$MAKEPKG_CONF" plain "$(gettext "Aborting...")" exit 1 # $E_CONFIG_ERROR fi # ensure specified program is installed local program="${agent%% *}" if [[ ! -x $program ]]; then local baseprog="${program##*/}" error "$(gettext "The download program %s is not installed.")" "$baseprog" plain "$(gettext "Aborting...")" exit 1 # $E_MISSING_PROGRAM fi echo "$agent" } download_file() { # download command local dlcmd=$1 # URL of the file local url=$2 # destination file local file=$3 # temporary download file, default to last component of the URL local dlfile="${url##*/}" # replace %o by the temporary dlfile if it exists if [[ $dlcmd = *%o* ]]; then dlcmd=${dlcmd//\%o/\"$file.part\"} dlfile="$file.part" fi # add the URL, either in place of %u or at the end if [[ $dlcmd = *%u* ]]; then dlcmd=${dlcmd//\%u/\"$url\"} else dlcmd="$dlcmd \"$url\"" fi local ret=0 eval "$dlcmd || ret=\$?" if (( ret )); then [[ ! -s $dlfile ]] && rm -f -- "$dlfile" return $ret fi # rename the temporary download file to the final destination if [[ $dlfile != $file ]]; then mv -f "$SRCDEST/$dlfile" "$SRCDEST/$file" fi } run_pacman() { local cmd printf -v cmd "%q " "$PACMAN" $PACMAN_OPTS "$@" if (( ! ASROOT )) && [[ ! $1 =~ ^-(T|Qq)$ ]]; then if [ "$(type -p sudo)" ]; then cmd="sudo $cmd" else cmd="su -c '$cmd'" fi fi eval "$cmd" } check_deps() { (( $# > 0 )) || return 0 # Disable error trap in pacman subshell call as this breaks bash-3.2 compatibility # Also, a non-zero return value is not unexpected and we are manually dealing them set +E local ret=0 local pmout pmout=$(run_pacman -T "$@") || ret=$? set -E if (( ret == 127 )); then #unresolved deps echo "$pmout" elif (( ret )); then error "$(gettext "'%s' returned a fatal error (%i): %s")" "$PACMAN" "$ret" "$pmout" return "$ret" fi } handle_deps() { local R_DEPS_SATISFIED=0 local R_DEPS_MISSING=1 (( $# == 0 )) && return $R_DEPS_SATISFIED local deplist="$*" if (( ! DEP_BIN )); then return $R_DEPS_MISSING fi if (( DEP_BIN )); then # install missing deps from binary packages (using pacman -S) msg "$(gettext "Installing missing dependencies...")" if ! run_pacman -S --asdeps $deplist; then error "$(gettext "'%s' failed to install missing dependencies.")" "$PACMAN" exit 1 # TODO: error code fi fi # we might need the new system environment # avoid triggering the ERR trap local restoretrap=$(trap -p ERR) trap - ERR source /etc/profile &>/dev/null eval $restoretrap return $R_DEPS_SATISFIED } resolve_deps() { local R_DEPS_SATISFIED=0 local R_DEPS_MISSING=1 # deplist cannot be declared like this: local deplist=$(foo) # Otherwise, the return value will depend on the assignment. local deplist deplist="$(set +E; check_deps $*)" || exit 1 [[ -z $deplist ]] && return $R_DEPS_SATISFIED if handle_deps $deplist; then # check deps again to make sure they were resolved deplist="$(set +E; check_deps $*)" || exit 1 [[ -z $deplist ]] && return $R_DEPS_SATISFIED fi msg "$(gettext "Missing Dependencies:")" local dep for dep in $deplist; do msg2 "$dep" done return $R_DEPS_MISSING } remove_deps() { (( ! RMDEPS )) && return # check for packages removed during dependency install (e.g. due to conflicts) # removing all installed packages is risky in this case if [[ -n $(comm -23 <(printf "%s\n" "${original_pkglist[@]}") \ <(printf "%s\n" "${current_pkglist[@]}")) ]]; then warning "$(gettext "Failed to remove installed dependencies.")" return 0 fi local deplist=($(comm -13 <(printf "%s\n" "${original_pkglist[@]}") \ <(printf "%s\n" "${current_pkglist[@]}"))) (( ${#deplist[@]} == 0 )) && return msg "Removing installed dependencies..." # exit cleanly on failure to remove deps as package has been built successfully if ! run_pacman -Rn ${deplist[@]}; then warning "$(gettext "Failed to remove installed dependencies.")" return 0 fi } download_sources() { msg "$(gettext "Retrieving Sources...")" pushd "$SRCDEST" &>/dev/null local netfile for netfile in "${source[@]}"; do local file=$(get_filepath "$netfile" || true) if [[ -n "$file" ]]; then msg2 "$(gettext "Found %s")" "${file##*/}" ln -sf "$file" "$srcdir/" continue fi file=$(get_filename "$netfile") local url=$(get_url "$netfile") # if we get here, check to make sure it was a URL, else fail if [[ $file = $url ]]; then error "$(gettext "%s was not found in the build directory and is not a URL.")" "$file" exit 1 # $E_MISSING_FILE fi # find the client we should use for this URL local dlclient=$(get_downloadclient "$url") || exit $? msg2 "$(gettext "Downloading %s...")" "$file" # fix flyspray bug #3289 local ret=0 download_file "$dlclient" "$url" "$file" || ret=$? if (( ret )); then error "$(gettext "Failure while downloading %s")" "$file" plain "$(gettext "Aborting...")" exit 1 fi rm -f "$srcdir/$file" ln -s "$SRCDEST/$file" "$srcdir/" done popd &>/dev/null } get_integlist() { local integ local integlist=() for integ in md5 sha1 sha256 sha384 sha512; do local integrity_sums=($(eval echo "\${${integ}sums[@]}")) if [[ -n "$integrity_sums" ]]; then integlist=(${integlist[@]} $integ) fi done if (( ${#integlist[@]} > 0 )); then echo ${integlist[@]} else echo ${INTEGRITY_CHECK[@]} fi } generate_checksums() { msg "$(gettext "Generating checksums for source files...")" plain "" if ! type -p openssl >/dev/null; then error "$(gettext "Cannot find openssl.")" exit 1 # $E_MISSING_PROGRAM fi local integlist if (( $# == 0 )); then integlist=$(get_integlist) else integlist=$@ fi local integ for integ in ${integlist[@]}; do case "$integ" in md5|sha1|sha256|sha384|sha512) : ;; *) error "$(gettext "Invalid integrity algorithm '%s' specified.")" "$integ" exit 1;; # $E_CONFIG_ERROR esac local ct=0 local numsrc=${#source[@]} echo -n "${integ}sums=(" local i local indent='' for (( i = 0; i < ${#integ} + 6; i++ )); do indent="$indent " done local netfile for netfile in "${source[@]}"; do local file="$(get_filepath "$netfile")" || missing_source_file "$netfile" local sum="$(openssl dgst -${integ} "$file")" sum=${sum##* } (( ct )) && echo -n "$indent" echo -n "'$sum'" ct=$(($ct+1)) (( $ct < $numsrc )) && echo done echo ")" done } check_checksums() { (( ! ${#source[@]} )) && return 0 if ! type -p openssl >/dev/null; then error "$(gettext "Cannot find openssl.")" exit 1 # $E_MISSING_PROGRAM fi local correlation=0 local integ required for integ in md5 sha1 sha256 sha384 sha512; do local integrity_sums=($(eval echo "\${${integ}sums[@]}")) if (( ${#integrity_sums[@]} == ${#source[@]} )); then msg "$(gettext "Validating source files with %s...")" "${integ}sums" correlation=1 local errors=0 local idx=0 local file for file in "${source[@]}"; do local found=1 file="$(get_filename "$file")" echo -n " $file ... " >&2 if ! file="$(get_filepath "$file")"; then echo "$(gettext "NOT FOUND")" >&2 errors=1 found=0 fi if (( $found )) ; then local expectedsum=$(tr '[:upper:]' '[:lower:]' <<< "${integrity_sums[$idx]}") local realsum="$(openssl dgst -${integ} "$file")" realsum="${realsum##* }" if [[ $expectedsum = $realsum ]]; then echo "$(gettext "Passed")" >&2 else echo "$(gettext "FAILED")" >&2 errors=1 fi fi idx=$((idx + 1)) done if (( errors )); then error "$(gettext "One or more files did not pass the validity check!")" exit 1 # TODO: error code fi elif (( ${#integrity_sums[@]} )); then error "$(gettext "Integrity checks (%s) differ in size from the source array.")" "$integ" exit 1 # TODO: error code fi done if (( ! correlation )); then error "$(gettext "Integrity checks are missing.")" exit 1 # TODO: error code fi } extract_sources() { msg "$(gettext "Extracting Sources...")" local netfile for netfile in "${source[@]}"; do local file=$(get_filename "$netfile") if in_array "$file" ${noextract[@]}; then #skip source files in the noextract=() array # these are marked explicitly to NOT be extracted continue fi # fix flyspray #6246 local file_type=$(file -bizL "$file") local ext=${file##*.} local cmd='' case "$file_type" in *application/x-tar*|*application/zip*|*application/x-zip*|*application/x-cpio*) cmd="bsdtar" ;; *application/x-gzip*) case "$ext" in gz|z|Z) cmd="gzip" ;; *) continue;; esac ;; *application/x-bzip*) case "$ext" in bz2|bz) cmd="bzip2" ;; *) continue;; esac ;; *application/x-xz*) case "$ext" in xz) cmd="xz" ;; *) continue;; esac ;; *) # See if bsdtar can recognize the file if bsdtar -tf "$file" -q '*' &>/dev/null; then cmd="bsdtar" else continue fi ;; esac local ret=0 msg2 "$(gettext "Extracting %s with %s")" "$file" "$cmd" if [[ $cmd = bsdtar ]]; then $cmd -xf "$file" || ret=$? else rm -f "${file%.*}" $cmd -dcf "$file" > "${file%.*}" || ret=$? fi if (( ret )); then error "$(gettext "Failed to extract %s")" "$file" plain "$(gettext "Aborting...")" exit 1 fi done if (( EUID == 0 )); then # change perms of all source files to root user & root group chown -R 0:0 "$srcdir" fi } error_function() { if [[ -p $logpipe ]]; then rm "$logpipe" fi # first exit all subshells, then print the error if (( ! BASH_SUBSHELL )); then error "$(gettext "A failure occurred in %s().")" "$1" plain "$(gettext "Aborting...")" remove_deps fi exit 2 # $E_BUILD_FAILED } run_function() { if [[ -z $1 ]]; then return 1 fi local pkgfunc="$1" # clear user-specified buildflags if requested if [[ $(check_option buildflags) = "n" ]]; then CFLAGS="" CXXFLAGS="" LDFLAGS="" fi # clear user-specified makeflags if requested if [[ $(check_option makeflags) = "n" ]]; then MAKEFLAGS="" fi msg "$(gettext "Starting %s()...")" "$pkgfunc" cd "$srcdir" # ensure all necessary build variables are exported export CFLAGS CXXFLAGS LDFLAGS MAKEFLAGS CHOST # save our shell options so pkgfunc() can't override what we need local shellopts=$(shopt -p) local ret=0 local restoretrap if (( LOGGING )); then local fullver=$(get_full_version $epoch $pkgver $pkgrel) local BUILDLOG="${startdir}/${pkgbase}-${fullver}-${CARCH}-$pkgfunc.log" if [[ -f $BUILDLOG ]]; then local i=1 while true; do if [[ -f $BUILDLOG.$i ]]; then i=$(($i +1)) else break fi done mv "$BUILDLOG" "$BUILDLOG.$i" fi # ensure overridden package variables survive tee with split packages logpipe=$(mktemp -u "$startdir/logpipe.XXXXXXXX") mkfifo "$logpipe" tee "$BUILDLOG" < "$logpipe" & local teepid=$! restoretrap=$(trap -p ERR) trap 'error_function $pkgfunc' ERR $pkgfunc &>"$logpipe" eval $restoretrap wait $teepid rm "$logpipe" else restoretrap=$(trap -p ERR) trap 'error_function $pkgfunc' ERR $pkgfunc 2>&1 eval $restoretrap fi # reset our shell options eval "$shellopts" } run_build() { # use distcc if it is requested (check buildenv and PKGBUILD opts) if [[ $(check_buildenv distcc) = "y" && $(check_option distcc) != "n" ]]; then [[ -d /usr/lib/distcc/bin ]] && export PATH="/usr/lib/distcc/bin:$PATH" export DISTCC_HOSTS elif [[ $(check_option distcc) = "n" ]]; then # if it is not wanted, clear the makeflags too MAKEFLAGS="" fi # use ccache if it is requested (check buildenv and PKGBUILD opts) if [[ $(check_buildenv ccache) = "y" && $(check_option ccache) != "n" ]]; then [[ -d /usr/lib/ccache/bin ]] && export PATH="/usr/lib/ccache/bin:$PATH" fi run_function "build" } run_check() { run_function "check" } run_package() { local pkgfunc if [[ -z $1 ]]; then pkgfunc="package" else pkgfunc="package_$1" fi run_function "$pkgfunc" } tidy_install() { cd "$pkgdir" msg "$(gettext "Tidying install...")" if [[ $(check_option docs) = "n" && -n ${DOC_DIRS[*]} ]]; then msg2 "$(gettext "Removing doc files...")" rm -rf ${DOC_DIRS[@]} fi if [[ $(check_option purge) = "y" && -n ${PURGE_TARGETS[*]} ]]; then msg2 "$(gettext "Purging other files...")" local pt for pt in "${PURGE_TARGETS[@]}"; do if [[ ${pt} = ${pt//\/} ]]; then find . -type f -name "${pt}" -exec rm -f -- '{}' \; else rm -f ${pt} fi done fi if [[ $(check_option zipman) = "y" && -n ${MAN_DIRS[*]} ]]; then msg2 "$(gettext "Compressing man and info pages...")" local manpage ext file link hardlinks hl find ${MAN_DIRS[@]} -type f 2>/dev/null | while read manpage ; do ext="${manpage##*.}" file="${manpage##*/}" if [[ $ext != gz && $ext != bz2 ]]; then # update symlinks to this manpage find ${MAN_DIRS[@]} -lname "$file" 2>/dev/null | while read link ; do rm -f "$link" ln -sf "${file}.gz" "${link}.gz" done # check file still exists (potentially already compressed due to hardlink) if [[ -f ${manpage} ]]; then # find hard links and remove them # the '|| true' part keeps the script from bailing if find returned an # error, such as when one of the man directories doesn't exist hardlinks="$(find ${MAN_DIRS[@]} \! -name "$file" -samefile "$manpage" 2>/dev/null)" || true for hl in ${hardlinks}; do rm -f "${hl}"; done # compress the original gzip -9 "$manpage" # recreate hard links removed earlier for hl in ${hardlinks}; do ln "${manpage}.gz" "${hl}.gz" chmod 644 ${hl}.gz done fi fi done fi if [[ $(check_option strip) = y ]]; then msg2 "$(gettext "Stripping unneeded symbols from binaries and libraries...")" # make sure library stripping variables are defined to prevent excess stripping [[ -z ${STRIP_SHARED+x} ]] && STRIP_SHARED="-S" [[ -z ${STRIP_STATIC+x} ]] && STRIP_STATIC="-S" local binary find . -type f -perm -u+w 2>/dev/null | while read binary ; do case "$(file -bi "$binary")" in *application/x-sharedlib*) # Libraries (.so) /usr/bin/strip $STRIP_SHARED "$binary";; *application/x-archive*) # Libraries (.a) /usr/bin/strip $STRIP_STATIC "$binary";; *application/x-executable*) # Binaries /usr/bin/strip $STRIP_BINARIES "$binary";; esac done fi if [[ $(check_option libtool) = "n" ]]; then msg2 "$(gettext "Removing libtool .la files...")" find . ! -type d -name "*.la" -exec rm -f -- '{}' \; fi if [[ $(check_option emptydirs) = "n" ]]; then msg2 "$(gettext "Removing empty directories...")" find . -depth -type d -empty -delete fi } write_pkginfo() { local builddate=$(date -u "+%s") if [[ -n $PACKAGER ]]; then local packager="$PACKAGER" else local packager="Unknown Packager" fi local size="$(@DUPATH@ -sk)" size="$(( ${size%%[^0-9]*} * 1024 ))" msg2 "$(gettext "Generating .PKGINFO file...")" echo "# Generated by makepkg $myver" if (( INFAKEROOT )); then echo "# using $(fakeroot -v)" fi echo "# $(LC_ALL=C date -u)" echo "pkgname = $1" (( SPLITPKG )) && echo pkgbase = $pkgbase echo "pkgver = $(get_full_version $epoch $pkgver $pkgrel)" echo "pkgdesc = $pkgdesc" echo "url = $url" echo "builddate = $builddate" echo "packager = $packager" echo "size = $size" echo "arch = $PKGARCH" [[ $license ]] && printf "license = %s\n" "${license[@]}" [[ $replaces ]] && printf "replaces = %s\n" "${replaces[@]}" [[ $groups ]] && printf "group = %s\n" "${groups[@]}" [[ $depends ]] && printf "depend = %s\n" "${depends[@]}" [[ $optdepends ]] && printf "optdepend = %s\n" "${optdepends[@]}" [[ $conflicts ]] && printf "conflict = %s\n" "${conflicts[@]}" [[ $provides ]] && printf "provides = %s\n" "${provides[@]}" [[ $backup ]] && printf "backup = %s\n" "${backup[@]}" local it for it in "${packaging_options[@]}"; do local ret="$(check_option $it)" if [[ $ret != "?" ]]; then if [[ $ret = y ]]; then echo "makepkgopt = $it" else echo "makepkgopt = !$it" fi fi done # TODO maybe remove this at some point # warn if license array is not present or empty if [[ -z $license ]]; then warning "$(gettext "Please add a license line to your %s!")" "$BUILDSCRIPT" plain "$(gettext "Example for GPL\'ed software: license=('GPL').")" fi } check_package() { cd "$pkgdir" # check existence of backup files local file for file in "${backup[@]}"; do if [[ ! -f $file ]]; then warning "$(gettext "Backup entry file not in package : %s")" "$file" fi done # check for references to the build and package directory if find "${pkgdir}" -type f -print0 | xargs -0 grep -q -I "${srcdir}" ; then warning "$(gettext "Package contains reference to %s")" "\$srcdir" fi if find "${pkgdir}" -type f -print0 | xargs -0 grep -q -I "${pkgdir}" ; then warning "$(gettext "Package contains reference to %s")" "\$pkgdir" fi } create_package() { if [[ ! -d $pkgdir ]]; then error "$(gettext "Missing pkg/ directory.")" plain "$(gettext "Aborting...")" exit 1 # $E_MISSING_PKGDIR fi check_package cd "$pkgdir" msg "$(gettext "Creating package...")" local nameofpkg if [[ -z $1 ]]; then nameofpkg="$pkgname" else nameofpkg="$1" fi if [[ $arch = "any" ]]; then PKGARCH="any" else PKGARCH=$CARCH fi write_pkginfo $nameofpkg > .PKGINFO local comp_files=".PKGINFO" # check for changelog/install files for i in 'changelog/.CHANGELOG' 'install/.INSTALL'; do IFS='/' read -r orig dest <<< "$i" if [[ -n ${!orig} ]]; then msg2 "$(gettext "Adding %s file...")" "$orig" cp "$startdir/${!orig}" "$dest" chmod 644 "$dest" comp_files+=" $dest" fi done # tar it up msg2 "$(gettext "Compressing package...")" local EXT case "$PKGEXT" in *tar.gz) EXT=${PKGEXT%.gz} ;; *tar.bz2) EXT=${PKGEXT%.bz2} ;; *tar.xz) EXT=${PKGEXT%.xz} ;; *tar) EXT=${PKGEXT} ;; *) warning "$(gettext "'%s' is not a valid archive extension.")" \ "$PKGEXT" ; EXT=$PKGEXT ;; esac local fullver=$(get_full_version $epoch $pkgver $pkgrel) local pkg_file="$PKGDEST/${nameofpkg}-${fullver}-${PKGARCH}${PKGEXT}" local ret=0 # when fileglobbing, we want * in an empty directory to expand to # the null string rather than itself shopt -s nullglob # TODO: Maybe this can be set globally for robustness shopt -s -o pipefail bsdtar -cf - $comp_files * | case "$PKGEXT" in *tar.gz) gzip -c -f -n ;; *tar.bz2) bzip2 -c -f ;; *tar.xz) xz -c -z - ;; *tar) cat ;; esac > ${pkg_file} || ret=$? shopt -u nullglob shopt -u -o pipefail if (( ret )); then error "$(gettext "Failed to create package file.")" exit 1 # TODO: error code fi if (( ! ret )) && [[ ! "$PKGDEST" -ef "${startdir}" ]]; then ln -sf "${pkg_file}" "${pkg_file/$PKGDEST/$startdir}" ret=$? fi if (( ret )); then warning "$(gettext "Failed to create symlink to package file.")" fi } create_srcpackage() { cd "$startdir" # Get back to our src directory so we can begin with sources. mkdir -p "$srcdir" chmod a-s "$srcdir" cd "$srcdir" if (( ! SKIPINTEG || SOURCEONLY == 2 )); then download_sources fi if (( ! SKIPINTEG )); then # We can only check checksums if we have all files. check_checksums else warning "$(gettext "Skipping integrity checks.")" fi cd "$startdir" msg "$(gettext "Creating source package...")" local srclinks="$(mktemp -d "$startdir"/srclinks.XXXXXXXXX)" mkdir "${srclinks}"/${pkgbase} msg2 "$(gettext "Adding %s...")" "$BUILDSCRIPT" ln -s "${BUILDFILE}" "${srclinks}/${pkgbase}/${BUILDSCRIPT}" local file for file in "${source[@]}"; do if [[ -f $file ]]; then msg2 "$(gettext "Adding %s...")" "$file" ln -s "${startdir}/$file" "$srclinks/$pkgbase" elif (( SOURCEONLY == 2 )); then local absfile=$(get_filepath "$file") || missing_source_file "$file" msg2 "$(gettext "Adding %s...")" "${absfile##*/}" ln -s "$absfile" "$srclinks/$pkgbase" fi done local i for i in 'changelog' 'install'; do local filelist=$(sed -n "s/^[[:space:]]*$i=//p" "$BUILDSCRIPT") local file for file in $filelist; do # evaluate any bash variables used eval file=${file} if [[ ! -f "${srclinks}/${pkgbase}/$file" ]]; then msg2 "$(gettext "Adding %s file (%s)...")" "$i" "${file}" ln -s "${startdir}/$file" "${srclinks}/${pkgbase}/" fi done done local TAR_OPT case "$SRCEXT" in *tar.gz) TAR_OPT="z" ;; *tar.bz2) TAR_OPT="j" ;; *tar.xz) TAR_OPT="J" ;; *tar) TAR_OPT="" ;; *) warning "$(gettext "'%s' is not a valid archive extension.")" \ "$SRCEXT" ;; esac local fullver=$(get_full_version $epoch $pkgver $pkgrel) local pkg_file="$SRCPKGDEST/${pkgbase}-${fullver}${SRCEXT}" # tar it up msg2 "$(gettext "Compressing source package...")" cd "${srclinks}" if ! bsdtar -c${TAR_OPT}Lf "$pkg_file" ${pkgbase}; then error "$(gettext "Failed to create source package file.")" exit 1 # TODO: error code fi if (( ! ret )) && [[ ! "$SRCPKGDEST" -ef "${startdir}" ]]; then ln -sf "${pkg_file}" "${pkg_file/$SRCPKGDEST/$startdir}" ret=$? fi if (( ret )); then warning "$(gettext "Failed to create symlink to source package file.")" fi cd "${startdir}" rm -rf "${srclinks}" } install_package() { (( ! INSTALL )) && return if (( ! SPLITPKG )); then msg "$(gettext "Installing package %s with %s -U...")" "$pkgname" "$PACMAN" else msg "$(gettext "Installing %s package group with %s -U...")" "$pkgbase" "$PACMAN" fi local fullver pkg pkglist for pkg in ${pkgname[@]}; do # TODO: this wasn't properly fixed in commit 2020e629 fullver=$(get_full_version $epoch $pkgver $pkgrel) if [[ -f $PKGDEST/${pkg}-${fullver}-${CARCH}${PKGEXT} ]]; then pkglist+=" $PKGDEST/${pkg}-${fullver}-${CARCH}${PKGEXT}" else pkglist+=" $PKGDEST/${pkg}-${fullver}-any${PKGEXT}" fi done if ! run_pacman -U $pkglist; then warning "$(gettext "Failed to install built package(s).")" return 0 fi } check_sanity() { # check for no-no's in the build script local i local ret=0 for i in 'pkgname' 'pkgrel' 'pkgver'; do if [[ -z ${!i} ]]; then error "$(gettext "%s is not allowed to be empty.")" "$i" ret=1 fi done for i in "${pkgname[@]}"; do if [[ ${i:0:1} = "-" ]]; then error "$(gettext "%s is not allowed to start with a hyphen.")" "pkgname" ret=1 fi done if [[ ${pkgbase:0:1} = "-" ]]; then error "$(gettext "%s is not allowed to start with a hyphen.")" "pkgbase" ret=1 fi if [[ $pkgver =~ [:-] ]]; then error "$(gettext "%s is not allowed to contain colons or hyphens.")" "pkgver" ret=1 fi if [[ $pkgrel != ${pkgrel//-/} ]]; then error "$(gettext "%s is not allowed to contain hyphens.")" "pkgrel" ret=1 fi if [[ ! $epoch =~ ^[0-9]*$ ]]; then error "$(gettext "%s must be an integer.")" "epoch" ret=1 fi if [[ $arch != 'any' ]]; then if ! in_array $CARCH ${arch[@]}; then if (( ! IGNOREARCH )); then error "$(gettext "%s is not available for the '%s' architecture.")" "$pkgbase" "$CARCH" plain "$(gettext "Note that many packages may need a line added to their %s")" "$BUILDSCRIPT" plain "$(gettext "such as arch=('%s').")" "$CARCH" ret=1 fi fi fi local provides_list=() eval $(awk '/^[[:space:]]*provides=/,/\)/' "$BUILDFILE" | \ sed -e "s/provides=/provides_list+=/" -e "s/#.*//" -e 's/\\$//') for i in ${provides_list[@]}; do if [[ $i != ${i///} ]]; then error "$(gettext "Provides array cannot contain comparison (< or >) operators.")" ret=1 fi done local backup_list=() eval $(awk '/^[[:space:]]*backup=/,/\)/' "$BUILDFILE" | \ sed -e "s/backup=/backup_list+=/" -e "s/#.*//" -e 's/\\$//') for i in "${backup_list[@]}"; do if [[ ${i:0:1} = "/" ]]; then error "$(gettext "Backup entry should not contain leading slash : %s")" "$i" ret=1 fi done local optdepends_list=() eval $(awk '/^[[:space:]]*optdepends=\(/,/\)[[:space:]]*(#.*)?$/' "$BUILDFILE" | \ sed -e "s/optdepends=/optdepends_list+=/" -e "s/#.*//" -e 's/\\$//') for i in "${optdepends_list[@]}"; do local pkg=${i%%:*} if [[ ! $pkg =~ ^[[:alnum:]\>\<\=\.\+\_\-]+$ ]]; then error "$(gettext "Invalid syntax for optdepend : '%s'")" "$i" ret=1 fi done for i in 'changelog' 'install'; do local filelist=$(sed -n "s/^[[:space:]]*$i=//p" "$BUILDFILE") local file for file in $filelist; do # evaluate any bash variables used eval file=${file} if [[ ! -f $file ]]; then error "$(gettext "%s file (%s) does not exist.")" "$i" "$file" ret=1 fi done done local valid_options=1 local known kopt options_list eval $(awk '/^[[:space:]]*options=/,/\)/' "$BUILDFILE" | \ sed -e "s/options=/options_list+=/" -e "s/#.*//" -e 's/\\$//') for i in ${options_list[@]}; do known=0 # check if option matches a known option or its inverse for kopt in ${packaging_options[@]} ${other_options[@]}; do if [[ ${i} = ${kopt} || ${i} = "!${kopt}" ]]; then known=1 fi done if (( ! known )); then error "$(gettext "options array contains unknown option '%s'")" "$i" valid_options=0 fi done if (( ! valid_options )); then ret=1 fi if (( ${#pkgname[@]} > 1 )); then for i in ${pkgname[@]}; do if ! declare -f package_${i} >/dev/null; then error "$(gettext "missing package function for split package '%s'")" "$i" ret=1 fi done fi for i in ${PKGLIST[@]}; do if ! in_array $i ${pkgname[@]}; then error "$(gettext "requested package %s is not provided in %s")" "$i" "$BUILDFILE" ret=1 fi done return $ret } devel_check() { newpkgver="" # Do not update pkgver if --holdver is set, when building a source package, repackaging, # reading PKGBUILD from pipe (-f), or if we cannot write to the file (-w) if (( HOLDVER || SOURCEONLY || REPKG )) \ || [[ ! -f $BUILDFILE || ! -w $BUILDFILE ]]; then return fi if [[ -z $FORCE_VER ]]; then # Check if this is a svn/cvs/etc PKGBUILD; set $newpkgver if so. # This will only be used on the first call to makepkg; subsequent # calls to makepkg via fakeroot will explicitly pass the version # number to avoid having to determine the version number twice. # Also do a brief check to make sure we have the VCS tool available. oldpkgver=$pkgver if [[ -n ${_darcstrunk} && -n ${_darcsmod} ]] ; then type -p darcs >/dev/null || return 0 msg "$(gettext "Determining latest %s revision...")" 'darcs' newpkgver=$(date +%Y%m%d) elif [[ -n ${_cvsroot} && -n ${_cvsmod} ]] ; then type -p cvs >/dev/null || return 0 msg "$(gettext "Determining latest %s revision...")" 'cvs' newpkgver=$(date +%Y%m%d) elif [[ -n ${_gitroot} && -n ${_gitname} ]] ; then type -p git >/dev/null || return 0 msg "$(gettext "Determining latest %s revision...")" 'git' newpkgver=$(date +%Y%m%d) elif [[ -n ${_svntrunk} && -n ${_svnmod} ]] ; then type -p svn >/dev/null || return 0 msg "$(gettext "Determining latest %s revision...")" 'svn' newpkgver=$(LC_ALL=C svn info $_svntrunk | sed -n 's/^Last Changed Rev: \([0-9]*\)$/\1/p') elif [[ -n ${_bzrtrunk} && -n ${_bzrmod} ]] ; then type -p bzr >/dev/null || return 0 msg "$(gettext "Determining latest %s revision...")" 'bzr' newpkgver=$(bzr revno ${_bzrtrunk}) elif [[ -n ${_hgroot} && -n ${_hgrepo} ]] ; then type -p hg >/dev/null || return 0 msg "$(gettext "Determining latest %s revision...")" 'hg' if [[ -d ./src/$_hgrepo ]] ; then cd ./src/$_hgrepo hg pull hg update else [[ ! -d ./src/ ]] && mkdir ./src/ hg clone $_hgroot/$_hgrepo ./src/$_hgrepo cd ./src/$_hgrepo fi newpkgver=$(hg tip --template "{rev}") cd ../../ fi if [[ -n $newpkgver ]]; then msg2 "$(gettext "Version found: %s")" "$newpkgver" fi else # Version number retrieved from fakeroot->makepkg argument newpkgver=$FORCE_VER fi } devel_update() { # This is lame, but if we're wanting to use an updated pkgver for # retrieving svn/cvs/etc sources, we'll update the PKGBUILD with # the new pkgver and then re-source it. This is the most robust # method for dealing with PKGBUILDs that use, e.g.: # # pkgver=23 # ... # _foo=pkgver # if [[ -n $newpkgver ]]; then if [[ $newpkgver != $pkgver ]]; then if [[ -f $BUILDFILE && -w $BUILDFILE ]]; then @SEDINPLACE@ "s/^pkgver=[^ ]*/pkgver=$newpkgver/" "$BUILDFILE" @SEDINPLACE@ "s/^pkgrel=[^ ]*/pkgrel=1/" "$BUILDFILE" source "$BUILDFILE" fi fi fi } backup_package_variables() { local var for var in ${splitpkg_overrides[@]}; do local indirect="${var}_backup" eval "${indirect}=(\"\${$var[@]}\")" done } restore_package_variables() { local var for var in ${splitpkg_overrides[@]}; do local indirect="${var}_backup" if [[ -n ${!indirect} ]]; then eval "${var}=(\"\${$indirect[@]}\")" else unset ${var} fi done } run_split_packaging() { local pkgname_backup=${pkgname[@]} for pkgname in ${pkgname_backup[@]}; do pkgdir="$pkgdir/$pkgname" mkdir -p "$pkgdir" chmod a-s "$pkgdir" backup_package_variables run_package $pkgname tidy_install create_package $pkgname restore_package_variables pkgdir="${pkgdir%/*}" done pkgname=${pkgname_backup[@]} } # Canonicalize a directory path if it exists canonicalize_path() { local path="$1"; if [[ -d $path ]]; then ( cd "$path" pwd -P ) else echo "$path" fi } # getopt like parser parse_options() { local short_options=$1; shift; local long_options=$1; shift; local ret=0; local unused_options="" local i while [[ -n $1 ]]; do if [[ ${1:0:2} = '--' ]]; then if [[ -n ${1:2} ]]; then local match="" for i in ${long_options//,/ }; do if [[ ${1:2} = ${i//:} ]]; then match=$i break fi done if [[ -n $match ]]; then if [[ ${1:2} = $match ]]; then printf ' %s' "$1" else if [[ -n $2 ]]; then printf ' %s' "$1" shift printf " '%s'" "$1" else echo "makepkg: option '$1' $(gettext "requires an argument")" >&2 ret=1 fi fi else echo "makepkg: $(gettext "unrecognized option") '$1'" >&2 ret=1 fi else shift break fi elif [[ ${1:0:1} = '-' ]]; then for ((i=1; i<${#1}; i++)); do if [[ $short_options =~ ${1:i:1} ]]; then if [[ $short_options =~ ${1:i:1}: ]]; then if [[ -n ${1:$i+1} ]]; then printf ' -%s' "${1:i:1}" printf " '%s'" "${1:$i+1}" else if [[ -n $2 ]]; then printf ' -%s' "${1:i:1}" shift printf " '%s'" "${1}" else echo "makepkg: option $(gettext "requires an argument") -- '${1:i:1}'" >&2 ret=1 fi fi break else printf ' -%s' "${1:i:1}" fi else echo "makepkg: $(gettext "invalid option") -- '${1:i:1}'" >&2 ret=1 fi done else unused_options="${unused_options} '$1'" fi shift done printf " --" if [[ -n $unused_options ]]; then for i in ${unused_options[@]}; do printf ' %s' "$i" done fi if [[ -n $1 ]]; then while [[ -n $1 ]]; do printf " '%s'" "${1}" shift done fi printf "\n" return $ret } usage() { printf "makepkg (pacman) %s\n" "$myver" echo printf "$(gettext "Usage: %s [options]")\n" "$0" echo echo "$(gettext "Options:")" printf "$(gettext " -A, --ignorearch Ignore incomplete arch field in %s")\n" "$BUILDSCRIPT" echo "$(gettext " -c, --clean Clean up work files after build")" echo "$(gettext " -C, --cleancache Clean up source files from the cache")" echo "$(gettext " -d, --nodeps Skip all dependency checks")" echo "$(gettext " -e, --noextract Do not extract source files (use existing src/ dir)")" echo "$(gettext " -f, --force Overwrite existing package")" echo "$(gettext " -g, --geninteg Generate integrity checks for source files")" echo "$(gettext " -h, --help This help")" echo "$(gettext " -i, --install Install package after successful build")" echo "$(gettext " -L, --log Log package build process")" echo "$(gettext " -m, --nocolor Disable colorized output messages")" echo "$(gettext " -o, --nobuild Download and extract files only")" printf "$(gettext " -p Use an alternate build script (instead of '%s')")\n" "$BUILDSCRIPT" echo "$(gettext " -r, --rmdeps Remove installed dependencies after a successful build")" echo "$(gettext " -R, --repackage Repackage contents of the package without rebuilding")" echo "$(gettext " -s, --syncdeps Install missing dependencies with pacman")" echo "$(gettext " --allsource Generate a source-only tarball including downloaded sources")" echo "$(gettext " --asroot Allow makepkg to run as root user")" printf "$(gettext " --check Run the check() function in the %s")\n" "$BUILDSCRIPT" printf "$(gettext " --config Use an alternate config file (instead of '%s')")\n" "$confdir/makepkg.conf" printf "$(gettext " --holdver Prevent automatic version bumping for development %ss")\n" "$BUILDSCRIPT" printf "$(gettext " --nocheck Do not run the check() function in the %s")\n" "$BUILDSCRIPT" echo "$(gettext " --pkg Only build listed packages from a split package")" echo "$(gettext " --skipinteg Do not fail when integrity checks are missing")" echo "$(gettext " --source Generate a source-only tarball without downloaded sources")" echo echo "$(gettext "These options can be passed to pacman:")" echo echo "$(gettext " --noconfirm Do not ask for confirmation when resolving dependencies")" echo "$(gettext " --noprogressbar Do not show a progress bar when downloading files")" echo printf "$(gettext "If -p is not specified, makepkg will look for '%s'")\n" "$BUILDSCRIPT" echo } version() { printf "makepkg (pacman) %s\n" "$myver" printf "$(gettext "\ Copyright (c) 2006-2011 Pacman Development Team .\n\ Copyright (C) 2002-2006 Judd Vinet .\n\n\ This is free software; see the source for copying conditions.\n\ There is NO WARRANTY, to the extent permitted by law.\n")" } # PROGRAM START # determine whether we have gettext; make it a no-op if we do not if ! type -p gettext >/dev/null; then gettext() { echo "$@" } fi ARGLIST=("$@") # Parse Command Line Options. OPT_SHORT="AcCdefFghiLmop:rRsV" OPT_LONG="allsource,asroot,ignorearch,check,clean,cleancache,nodeps" OPT_LONG+=",noextract,force,forcever:,geninteg,help,holdver" OPT_LONG+=",install,log,nocolor,nobuild,nocheck,pkg:,rmdeps" OPT_LONG+=",repackage,skipinteg,source,syncdeps,version,config:" # Pacman Options OPT_LONG+=",noconfirm,noprogressbar" OPT_TEMP="$(parse_options $OPT_SHORT $OPT_LONG "$@" || echo 'PARSE_OPTIONS FAILED')" if [[ $OPT_TEMP = *'PARSE_OPTIONS FAILED'* ]]; then # This is a small hack to stop the script bailing with 'set -e' echo; usage; exit 1 # E_INVALID_OPTION; fi eval set -- "$OPT_TEMP" unset OPT_SHORT OPT_LONG OPT_TEMP while true; do case "$1" in # Pacman Options --noconfirm) PACMAN_OPTS+=" --noconfirm" ;; --noprogressbar) PACMAN_OPTS+=" --noprogressbar" ;; # Makepkg Options --allsource) SOURCEONLY=2 ;; --asroot) ASROOT=1 ;; -A|--ignorearch) IGNOREARCH=1 ;; -c|--clean) CLEANUP=1 ;; -C|--cleancache) CLEANCACHE=1 ;; --check) RUN_CHECK='y' ;; --config) shift; MAKEPKG_CONF=$1 ;; -d|--nodeps) NODEPS=1 ;; -e|--noextract) NOEXTRACT=1 ;; -f|--force) FORCE=1 ;; #hidden opt used by fakeroot call for svn/cvs/etc PKGBUILDs to set pkgver --forcever) shift; FORCE_VER=$1;; -F) INFAKEROOT=1 ;; -g|--geninteg) GENINTEG=1 ;; --holdver) HOLDVER=1 ;; -i|--install) INSTALL=1 ;; -L|--log) LOGGING=1 ;; -m|--nocolor) USE_COLOR='n' ;; --nocheck) RUN_CHECK='n' ;; -o|--nobuild) NOBUILD=1 ;; -p) shift; BUILDFILE=$1 ;; --pkg) shift; PKGLIST=($1) ;; -r|--rmdeps) RMDEPS=1 ;; -R|--repackage) REPKG=1 ;; --skipinteg) SKIPINTEG=1 ;; --source) SOURCEONLY=1 ;; -s|--syncdeps) DEP_BIN=1 ;; -h|--help) usage; exit 0 ;; # E_OK -V|--version) version; exit 0 ;; # E_OK --) OPT_IND=0; shift; break;; *) usage; exit 1 ;; # E_INVALID_OPTION esac shift done # preserve environment variables and canonicalize path [[ -n ${PKGDEST} ]] && _PKGDEST=$(canonicalize_path ${PKGDEST}) [[ -n ${SRCDEST} ]] && _SRCDEST=$(canonicalize_path ${SRCDEST}) [[ -n ${SRCPKGDEST} ]] && _SRCPKGDEST=$(canonicalize_path ${SRCPKGDEST}) # default config is makepkg.conf MAKEPKG_CONF=${MAKEPKG_CONF:-$confdir/makepkg.conf} # Source the config file; fail if it is not found if [[ -r $MAKEPKG_CONF ]]; then source "$MAKEPKG_CONF" else error "$(gettext "%s not found.")" "$MAKEPKG_CONF" plain "$(gettext "Aborting...")" exit 1 # $E_CONFIG_ERROR fi # Source user-specific makepkg.conf overrides if [[ -r ~/.makepkg.conf ]]; then source ~/.makepkg.conf fi # set pacman command if not already defined PACMAN=${PACMAN:-pacman} # check if messages are to be printed using color unset ALL_OFF BOLD BLUE GREEN RED YELLOW if [[ -t 2 && ! $USE_COLOR = "n" && $(check_buildenv color) = "y" ]]; then # prefer terminal safe colored and bold text when tput is supported if tput setaf 0 &>/dev/null; then ALL_OFF="$(tput sgr0)" BOLD="$(tput bold)" BLUE="${BOLD}$(tput setaf 4)" GREEN="${BOLD}$(tput setaf 2)" RED="${BOLD}$(tput setaf 1)" YELLOW="${BOLD}$(tput setaf 3)" else ALL_OFF="\e[1;0m" BOLD="\e[1;1m" BLUE="${BOLD}\e[1;34m" GREEN="${BOLD}\e[1;32m" RED="${BOLD}\e[1;31m" YELLOW="${BOLD}\e[1;33m" fi fi readonly ALL_OFF BOLD BLUE GREEN RED YELLOW # override settings with an environment variable for batch processing PKGDEST=${_PKGDEST:-$PKGDEST} PKGDEST=${PKGDEST:-$startdir} #default to $startdir if undefined if [[ ! -w $PKGDEST ]]; then error "$(gettext "You do not have write permission to store packages in %s.")" "$PKGDEST" plain "$(gettext "Aborting...")" exit 1 fi SRCDEST=${_SRCDEST:-$SRCDEST} SRCDEST=${SRCDEST:-$startdir} #default to $startdir if undefined if [[ ! -w $SRCDEST ]] ; then error "$(gettext "You do not have write permission to store downloads in %s.")" "$SRCDEST" plain "$(gettext "Aborting...")" exit 1 fi SRCPKGDEST=${_SRCPKGDEST:-$SRCPKGDEST} SRCPKGDEST=${SRCPKGDEST:-$startdir} #default to $startdir if undefined if (( HOLDVER )) && [[ -n $FORCE_VER ]]; then # The '\\0' is here to prevent gettext from thinking --holdver is an option error "$(gettext "\\0--holdver and --forcever cannot both be specified" )" exit 1 fi if (( CLEANCACHE )); then #fix flyspray feature request #5223 if [[ -n $SRCDEST && ! $SRCDEST -ef "${startdir}" ]]; then msg "$(gettext "Cleaning up ALL files from %s.")" "$SRCDEST" echo -n "$(gettext " Are you sure you wish to do this? ")" echo -n "$(gettext "[y/N]")" read answer answer=$(tr '[:lower:]' '[:upper:]' <<< "$answer") if [[ $answer = $(gettext YES) || $answer = $(gettext Y) ]]; then rm "$SRCDEST"/* if (( $? )); then error "$(gettext "Problem removing files; you may not have correct permissions in %s")" "$SRCDEST" exit 1 else # removal worked msg "$(gettext "Source cache cleaned.")" exit 0 fi else # answer = no msg "$(gettext "No files have been removed.")" exit 0 fi else # $SRCDEST is $startdir, two possibilities error "$(gettext "Source destination must be defined in %s.")" "$MAKEPKG_CONF" plain "$(gettext "In addition, please run makepkg -C outside of your cache directory.")" exit 1 fi fi if (( ! INFAKEROOT )); then if (( EUID == 0 && ! ASROOT )); then # Warn those who like to live dangerously. error "$(gettext "Running makepkg as root is a BAD idea and can cause")" plain "$(gettext "permanent, catastrophic damage to your system. If you")" plain "$(gettext "wish to run as root, please use the --asroot option.")" exit 1 # $E_USER_ABORT elif (( EUID > 0 && ASROOT )); then # Warn those who try to use the --asroot option when they are not root error "$(gettext "The --asroot option is meant for the root user only.")" plain "$(gettext "Please rerun makepkg without the --asroot flag.")" exit 1 # $E_USER_ABORT elif [[ $(check_buildenv fakeroot) = "y" ]] && (( EUID > 0 )); then if ! type -p fakeroot >/dev/null; then error "$(gettext "Fakeroot must be installed if using the 'fakeroot' option")" plain "$(gettext "in the BUILDENV array in %s.")" "$MAKEPKG_CONF" exit 1 fi elif (( EUID > 0 )); then warning "$(gettext "Running makepkg as an unprivileged user will result in non-root")" plain "$(gettext "ownership of the packaged files. Try using the fakeroot environment by")" plain "$(gettext "placing 'fakeroot' in the BUILDENV array in %s.")" "$MAKEPKG_CONF" sleep 1 fi else if [[ -z $FAKEROOTKEY ]]; then error "$(gettext "Do not use the '-F' option. This option is only for use by makepkg.")" exit 1 # TODO: error code fi fi # check for sudo if we will need it during makepkg execution if (( ! ( ASROOT || INFAKEROOT ) && ( DEP_BIN || RMDEPS || INSTALL ) )); then if ! type -p sudo >/dev/null; then warning "$(gettext "Sudo can not be found. Will use su to acquire root privileges.")" fi fi unset pkgname pkgbase pkgver pkgrel epoch pkgdesc url license groups provides unset md5sums replaces depends conflicts backup source install changelog build unset makedepends optdepends options noextract BUILDFILE=${BUILDFILE:-$BUILDSCRIPT} if [[ ! -f $BUILDFILE ]]; then if [[ -t 0 ]]; then error "$(gettext "%s does not exist.")" "$BUILDFILE" exit 1 else # PKGBUILD passed through a pipe BUILDFILE=/dev/stdin source "$BUILDFILE" fi else crlftest=$(file "$BUILDFILE" | grep -F 'CRLF' || true) if [[ -n $crlftest ]]; then error "$(gettext "%s contains CRLF characters and cannot be sourced.")" "$BUILDFILE" exit 1 fi if [[ ${BUILDFILE:0:1} != "/" ]]; then BUILDFILE="$startdir/$BUILDFILE" fi source "$BUILDFILE" fi # set defaults if they weren't specified in buildfile pkgbase=${pkgbase:-${pkgname[0]}} epoch=${epoch:-0} if (( GENINTEG )); then mkdir -p "$srcdir" chmod a-s "$srcdir" cd "$srcdir" download_sources generate_checksums exit 0 # $E_OK fi # check the PKGBUILD for some basic requirements check_sanity || exit 1 # We need to run devel_update regardless of whether we are in the fakeroot # build process so that if the user runs makepkg --forcever manually, we # 1) output the correct pkgver, and 2) use the correct filename when # checking if the package file already exists - fixes FS #9194 devel_check devel_update if (( ${#pkgname[@]} > 1 )); then SPLITPKG=1 fi # test for available PKGBUILD functions if declare -f build >/dev/null; then BUILDFUNC=1 fi if declare -f check >/dev/null; then # "Hide" check() function if not going to be run if [[ $RUN_CHECK = 'y' || (! $(check_buildenv check) = "n" && ! $RUN_CHECK = "n") ]]; then CHECKFUNC=1 fi fi if declare -f package >/dev/null; then PKGFUNC=1 elif [[ $SPLITPKG -eq 0 ]] && declare -f package_${pkgname} >/dev/null; then SPLITPKG=1 fi if [[ -n "${PKGLIST[@]}" ]]; then unset pkgname pkgname=("${PKGLIST[@]}") fi if (( ! SPLITPKG )); then fullver=$(get_full_version $epoch $pkgver $pkgrel) if [[ -f $PKGDEST/${pkgname}-${fullver}-${CARCH}${PKGEXT} \ || -f $PKGDEST/${pkgname}-${fullver}-any${PKGEXT} ]] \ && ! (( FORCE || SOURCEONLY || NOBUILD )); then if (( INSTALL )); then warning "$(gettext "A package has already been built, installing existing package...")" install_package exit $? else error "$(gettext "A package has already been built. (use -f to overwrite)")" exit 1 fi fi else allpkgbuilt=1 somepkgbuilt=0 for pkg in ${pkgname[@]}; do # TODO: this wasn't properly fixed in commit 2020e629 fullver=$(get_full_version $epoch $pkgver $pkgrel) if [[ -f $PKGDEST/${pkg}-${fullver}-${CARCH}${PKGEXT} \ || -f $PKGDEST/${pkg}-${fullver}-any${PKGEXT} ]]; then somepkgbuilt=1 else allpkgbuilt=0 fi done if ! (( FORCE || SOURCEONLY || NOBUILD )); then if (( allpkgbuilt )); then if (( INSTALL )); then warning "$(gettext "The package group has already been built, installing existing packages...")" install_package exit $? else error "$(gettext "The package group has already been built. (use -f to overwrite)")" exit 1 fi fi if (( somepkgbuilt )); then error "$(gettext "Part of the package group has already been built. (use -f to overwrite)")" exit 1 fi fi unset allpkgbuilt somepkgbuilt fi # Run the bare minimum in fakeroot if (( INFAKEROOT )); then if (( ! SPLITPKG )); then if (( ! PKGFUNC )); then if (( ! REPKG )); then if (( BUILDFUNC )); then run_build (( CHECKFUNC )) && run_check tidy_install fi else warning "$(gettext "Repackaging without the use of a package() function is deprecated.")" plain "$(gettext "File permissions may not be preserved.")" fi else run_package tidy_install fi create_package else run_split_packaging fi msg "$(gettext "Leaving fakeroot environment.")" exit 0 # $E_OK fi fullver=$(get_full_version $epoch $pkgver $pkgrel) msg "$(gettext "Making package: %s")" "$pkgbase $fullver ($(date))" # if we are creating a source-only package, go no further if (( SOURCEONLY )); then if [[ -f $SRCPKGDEST/${pkgbase}-${fullver}${SRCEXT} ]] \ && (( ! FORCE )); then error "$(gettext "A source package has already been built. (use -f to overwrite)")" exit 1 fi create_srcpackage msg "$(gettext "Source package created: %s")" "$pkgbase ($(date))" exit 0 fi if (( NODEPS || ( (NOBUILD || REPKG) && !DEP_BIN ) )); then # no warning message needed for nobuild, repkg if (( NODEPS || ( REPKG && PKGFUNC ) )); then warning "$(gettext "Skipping dependency checks.")" fi elif type -p "${PACMAN%% *}" >/dev/null; then if (( RMDEPS )); then original_pkglist=($(run_pacman -Qq)) # required by remove_dep fi deperr=0 msg "$(gettext "Checking runtime dependencies...")" resolve_deps ${depends[@]} || deperr=1 msg "$(gettext "Checking buildtime dependencies...")" resolve_deps ${makedepends[@]} || deperr=1 if (( CHECKFUNC )); then resolve_deps ${checkdepends[@]} || deperr=1 fi if (( RMDEPS )); then current_pkglist=($(run_pacman -Qq)) # required by remove_deps fi if (( deperr )); then error "$(gettext "Could not resolve all dependencies.")" exit 1 fi else warning "$(gettext "%s was not found in PATH; skipping dependency checks.")" "${PACMAN%% *}" fi # ensure we have a sane umask set umask 0022 # get back to our src directory so we can begin with sources mkdir -p "$srcdir" chmod a-s "$srcdir" cd "$srcdir" if (( NOEXTRACT )); then warning "$(gettext "Skipping source retrieval -- using existing src/ tree")" warning "$(gettext "Skipping source integrity checks -- using existing src/ tree")" warning "$(gettext "Skipping source extraction -- using existing src/ tree")" if (( NOEXTRACT )) && [[ -z $(ls "$srcdir" 2>/dev/null) ]]; then error "$(gettext "The source directory is empty, there is nothing to build!")" plain "$(gettext "Aborting...")" exit 1 fi elif (( REPKG )); then if (( ! PKGFUNC && ! SPLITPKG )) \ && [[ ! -d $pkgdir || -z $(ls "$pkgdir" 2>/dev/null) ]]; then error "$(gettext "The package directory is empty, there is nothing to repackage!")" plain "$(gettext "Aborting...")" exit 1 fi else download_sources if (( ! SKIPINTEG )); then check_checksums else warning "$(gettext "Skipping integrity checks.")" fi extract_sources fi if (( NOBUILD )); then msg "$(gettext "Sources are ready.")" exit 0 #E_OK else # check for existing pkg directory; don't remove if we are repackaging if [[ -d $pkgdir ]] && (( ! REPKG || PKGFUNC || SPLITPKG )); then msg "$(gettext "Removing existing pkg/ directory...")" rm -rf "$pkgdir" fi mkdir -p "$pkgdir" chmod a-s "$pkgdir" cd "$startdir" # if we are root or if fakeroot is not enabled, then we don't use it if [[ $(check_buildenv fakeroot) != "y" ]] || (( EUID == 0 )); then if (( ! REPKG )); then devel_update (( BUILDFUNC )) && run_build (( CHECKFUNC )) && run_check fi if (( ! SPLITPKG )); then if (( PKGFUNC )); then run_package tidy_install else if (( ! REPKG )); then tidy_install else warning "$(gettext "Repackaging without the use of a package() function is deprecated.")" plain "$(gettext "File permissions may not be preserved.")" fi fi create_package else run_split_packaging fi else if (( ! REPKG && ( PKGFUNC || SPLITPKG ) )); then devel_update (( BUILDFUNC )) && run_build (( CHECKFUNC )) && run_check cd "$startdir" fi msg "$(gettext "Entering fakeroot environment...")" if [[ -n $newpkgver ]]; then fakeroot -- $0 --forcever $newpkgver -F "${ARGLIST[@]}" || exit $? else fakeroot -- $0 -F "${ARGLIST[@]}" || exit $? fi fi fi fullver=$(get_full_version $epoch $pkgver $pkgrel) msg "$(gettext "Finished making: %s")" "$pkgbase $fullver ($(date))" install_package exit 0 #E_OK # vim: set ts=2 sw=2 noet: